User Code - Ricoh 917F Operating Instructions Manual

If you have not set the password, proceed to the following step.
11. Enter the number of copies to print, and then press [Print].
The stored file is printed.
• To cancel printing, press [Cancel]. Then, press [JobReset]. After it has started, the file is deleted.
• Stored Print files sent to the machine is not deleted unless you delete them in the machine or select
[Auto Delete Stored Jobs] (see "System", Printer Reference). For details, see Job Type.
Deleting a Stored Print File
If a printed document is not as required, you can delete the Stored Print file.
1. On the machine's control panel, press the [Printer] key to display the printer screen.
1. Press [Prt.Jobs].
A list of print files stored in the machine appears.
2. Select [Stored Print Jobs] using the [ ] or [ ] key, and then press [Job List].
A list of sample print files stored in the machine appears.
3. Select the file you want to print using the [ ] or [ ] key, and then press [Delete].
A confirmation screen appears.
4. Press [Delete].
The selected file is deleted.
If you do not want to delete the file, press [Cancel].
• If you have already set a password in the printer driver, enter it to delete.

User Code

Set a user code for print logging.
Enter a user code using up to eight digits. A user code identifies a group of users and allows you to check
the number of sheets printed under each code with SmartDeviceMonitor for Admin.
The following table shows the tabs or menus where you can select this function.
Windows 2000 / XP / Vista, Windows Server
2003 / 2003 R2 / 2008
Enter a user code in the [User Code:] box on the
[Job Setup] tab in the Printing Preferences dialog
box.
Printing a Document
3
77