Entering A Pause; Entering A Tone - Ricoh 917F Operating Instructions Manual

• p.47 "Entering a pause"
• p.47 "Entering a tone"
• p.58 "Using the Quick Dial Keys"
• p.258 "Maximum Values"

Entering a pause

This section explains how to enter a pause.
Press the [Pause/Redial] key when dialing or storing a number to insert a pause of about two seconds.
• If you press the [Pause/Redial] key at the first digit, the Redial screen appears.
• A pause is shown as a "-" on the display.
• You can also program numbers including pauses in the destination list.

Entering a tone

This function allows a machine connected to a pulse dialing line to send tonal signals (for example if you
want to use a special service on a tone dialing line).
When you press [Tone], the machine dials the number using tonal signals.
This section explains how to use the tone function with On Hook Dial as an example.
BRJ028S
Specifying a Destination
47
1