Wireless Lan - Ricoh 917F Operating Instructions Manual

2. Connecting the Machine
Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
2
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN board is installed. If Ethernet and wireless LAN are
both connected, the selected interface has priority.
• p.28 "Interface Settings"

Wireless LAN

This section lists the settings required for using the printer or LAN-Fax function with a wireless LAN
connection.
For details about how to specify the settings, see "Interface Settings".
Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
70
User Tool
Ethernet Speed
IEEE802.1X Auth.(Ethernet)
LAN Type
Permit SNMPv3 Communictn.
Permit SSL/TLS Comm.
Host Name
Machine Name
User Tool
Machine IPv4 Address
IPv4 Gateway Address
Machine IPv6 Address
IPv6 Gateway Address
IPv6 Stateless Setting
DNS Configuration
DDNS Configuration
Setting Requirements
As required
As required
Necessary
As required
As required
As required
As required
Setting Requirements
Necessary
As required
As required
As required
As required
As required
As required