Other Transmission Features; Sending At A Specific Time (Send Later) - Ricoh 917F Operating Instructions Manual

2. Other Transmission Features

This section explains functions you can apply using the [TX Mode] setting, such as Sending at a Specific
Time (Send Later) and Label Insertion. TX Mode allows you to use various functions with transmissions.

Sending at a Specific Time (Send Later)

Using this function, you can instruct the machine to delay transmission of your fax document until a specified
later time.
This allows you to take advantage of off-peak telephone charges without having to be by the machine at
the time.
• If the machine is switched off for about twelve hours, all fax documents stored in memory are lost. If
documents are lost for this reason, a Power Failure Report is automatically printed when the operation
switch is turned on. Use this report to check the list of lost documents. For details, see "Turning Off the
Main Power / In the Event of Power Failure", Troubleshooting.
• This function is unavailable with Immediate Transmission. If you specify Immediate Transmission for
this function, the "Dest. and functions that could not be specified on immediate transmission is already
selected." message appears. When this happens, press [Exit], and then switch to Memory
Transmission.
1. Place the original, and then select the scan settings you require.
2. Press [TX Mode].
3. Select [Send Later] using [ ] or [ ], and then press the [OK] key.
4. Select [Send at Specified Time] using [ ] or [ ], and then press the [OK] key.
2
99