Scanner Features; Accessing User Tools; Changing User Tools - Ricoh 917F Operating Instructions Manual

8. Scanner Features

This chapter describes the user tools in the Scanner Features menu.

Accessing User Tools

This section describes how to change the settings of [Scanner Features].
• Procedures for configuring system settings differ from procedures for configuring other settings. You
must return to the initial screen when you finish configuring the system settings. For details about
returning to the initial screen, see "Closing User Tools".
• Any changes you make in [Scanner Features] remain in effect even if the main power switch or
operation switch is turned off, or the [Clear Modes] key is pressed.
• Depending on the sending method, some settings cannot be applied.
• p.156 "Closing User Tools"

Changing User Tools

This section describes how to change the settings of User Tools.
• If Administrator Authentication Management is specified, contact your administrator.
1. Press the [User Tools/Counter] key.
BRB001S
8
155