8021X - Ricoh 917F Operating Instructions Manual

8021x

Use the "8021x" commands to display IEEE 802.1x related information.
View settings
msh> 8021x
Configuration
msh> 8021x "parameter"
Parameter
eap {tls|ttls|leap|peap} {chap|
mschap|mschapv2|pap|md5|
tls}
username "character string"
username2 "character string"
domain name "character string"
password "character string"
Value configured
You can specify the EAP authentication type.
tls: EAP-TLS (default)
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap, mschap, mschapv2, pap, md5, or tls are settings for
the phase 2 method, and must be set when using EAP-TTLS
or PEAP.
Do not make these settings when using other EAP
authentication types.
If you select EAP-TTLS, you can select chap, mschap,
mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2 or tls.
You can specify the login user name for the Radius server.
Usable characters: ASCII 0x20-0x7e (31 bytes).
The default is blank.
You can specify the phase 2 username for EAP-TTLS/PEAP
phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31 bytes).
The default is blank.
You can specify the login domain name for the Radius server.
The characters you can enter are ASCII 0x20-0x7e (31
bytes), but not "@" or "\".
The default is blank.
You can specify the login for the Radius server.
Remote Maintenance by telnet
4
157