Forwarding Mark - Ricoh 917F Operating Instructions Manual

4. Select [Off] using [ ] or [ ], and then press the [OK] key.
The set receiver name is deleted.
5. Press the [User Tools/Counter] key.

Forwarding Mark

This section describes Forwarding Mark.
You can print a Forwarding Mark on receiver's documents that have been forwarded.
The receiver can distinguish between forwarded and normally received documents.
You can specify whether or not to print a Forwarding Mark in the User Parameters (switch 02, bit 0). See
"Parameter Settings".
This function is not available when Forwarding is performed to a folder destination.
• p.226 "Parameter Settings"
BBM015S
Forwarding
6
225