Configuring The Scan Settings On A Client Computer; Changing A Scan Profile - Ricoh 917F Operating Instructions Manual

Configuring the Scan Settings on a Client
Computer
This section explains how to configure a scan profile. A scan profile contains scan settings specified on a
client computer.

Changing a Scan Profile

Use the following procedure to change a scan profile.
Whenever the machine is first registered to a computer, a profile is created automatically. Using the
following procedure, you can change this profile on the computer.
1. On the [Start] menu, click [Control Panel].
Control Panel opens.
2. Click [Hardware and Sound], and then click [Scanner and Cameras].
The [Scanner and Cameras] dialog box appears.
3. Select this machine, and then click [Scan Profiles].
The [Scan Profiles] window appears.
4. Select a profile, and then click [Edit].
The changed profile dialog box appears.
5. Configure the necessary settings.
For details, see "Scan Profile Items and Settings".
6. Click [Save Profile].
The changed scan settings are saved as a profile.
• If a profile does not appear in the [Scanner and Cameras] dialog box, the associated machine might
be turned off, or the required WSD scanner settings might not have been specified. For details about
WSD scanner settings, see "Preparation for Sending Files Using WSD".
• If a profile does not appear in the [Scan Profile] dialog box, recreate it as a new profile. For details,
see "Creating a New Scan Profile".
• You can create multiple profiles.
• p.96 "Scan Profile Items and Settings"
• p.83 "Preparation for Sending Files Using WSD"
• p.96 "Creating a New Scan Profile"

Configuring the Scan Settings on a Client Computer

3
95