Setting Sep Codes For Reception - Ricoh 917F Operating Instructions Manual

2. Other Transmission Features

Setting SEP Codes for Reception

This section explains how to enter a SEP Code to request the destination to transmit a document.
You can receive a document stored in the destination's memory if the document has the same SEP Code
as the SEP Code you entered.
2
This function enables the machine to receive documents from multiple destinations.
• Documents can be received from facsimiles that have Information Boxes.
• A SEP Code cannot be used with Internet Fax.
• To use this function, set [SEP Code RX] to [On].
• Program this function to one of the User Function keys in advance. For details about the User Function
keys, see "General Settings/Adjust".
1. Press [TX Mode].
2. Select [SEP Code RX] using [ ] or [ ], and then press the [OK] key.
3. Select [On] using [ ] or [ ], and then press the [OK] key.
The screen returns to that of step 2.
4. Press the [Escape] key.
5. Enter the fax number of a destination or an IP-Fax destination.
116