Logging On Using Administrator Authentication - Ricoh 917F Operating Instructions Manual

2. Configuring Administrator Authentication

Logging on Using Administrator Authentication

If administrator authentication has been specified, log on using an administrator's user name and password.
This section describes how to log on. When you log on with a user name that has multiple administrator
authorities, one of the authorities associated with that name is displayed.
1. Press the [User Tools/Counter] key.
2
2. Press [Login].
3. Enter the login user name, and then press the [OK] key.
When you log on to the machine for the first time as the administrator, enter "admin".
4. Enter the login password, and then press the [OK] key.
If assigning the administrator for the first time, press the [OK] key without entering login password.
"Authenticating... Please wait." appears, followed by the screen for specifying the default. To log on
as an administrator, enter the administrator's login user name and login password.
• If you try to log on from an operating screen, "Privileges are required. Administrator-login is limited
to setting changes only." appears. Press the [User Tools/Counter] key to change the default.
• If user authentication has already been specified, a screen for authentication appears.
• If you log on using administrator authority, the name of the administrator logging on appears.
• If you log on using a login user name with the authority of more than one administrator, "Administrator"
appears.
32