Sending Files To Netware Server - Ricoh 917F Operating Instructions Manual

10. Press the [OK] key.
• If you change the protocol after entering the path name, user name, or password, a confirmation
message appears.
• The connection test may take time.
• You can register the path to the destination in the machine's address book. For details, see "Registering
the Path to the Selected Destination in the Address Book".
• p.78 "Registering the Path to the Selected Destination in the Address Book"

Sending Files to NetWare Server

This section explains how to specify destinations when sending files to a NetWare server.
The NetWare folder of the destination can be specified in an NDS tree or on a NetWare Bindery server,
depending on the NetWare environment. Consult your administrator.
You can send a file to NetWare server by any of the following methods:
• Enter the destination path of the Netware server directly
• Specify the path by browsing to the destination on the Netware server
Entering the path of the Netware server directly
You can enter the path of the NetWare server.
1. Press [Dest.:].
Specifying Scan to Folder Destinations
2
73