1. Windows Configuration
13.
Check that the name of the printer driver you want to install is selected, and then click [Next
>].
14.
Change the name of the printer if you want, and then click [Next >].
1
Select the [Yes] check box to configure the printer as default.
15.
Specify whether or not to print a test page, and then click [Finish].
The printer driver installation starts.
• Depending on the environment you are using, the [AutoPlay] dialog box may appear. If this happens,
click [Run SETUP.EXE]. If the [User Account Control] dialog box appears, click [Continue] to allow
the auto play program to run.
• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on
the CD-ROM root directory.
Changing the Port Settings DeskTop Binder-SmartDeviceMonitor for Client
Follow the procedure below to change the DeskTop Binder-SmartDeviceMonitor for Client settings, such
as TCP/IP timeout, recovery/parallel printing, and printer groups.
Windows 2000:
1.
Open the [Printers] window from the [Start] menu.
2.
Click the icon of the printer you want to use. On the [File] menu, click [Properties].
The printer properties appears.
3.
On the [Ports] tab, click [Configure Port].
The [Port Configuration] dialog box appears.
Windows XP, Windows Server 2003 / 2003 R2:
1.
Open the [Printers and Faxes] window from the [Start] menu.
The [Printers and Faxes] window appears.
2.
Click the icon of the printer you want to use. On the [File] menu, click [Properties].
The printer properties appears.
3.
Click the [Port] tab, and then click [Configure Port].
The [Port Configuration] dialog box appears.
20