Ricoh 917F Operating Instructions Manual page 708

3. Sending Scan Files Using WSD
2. Press the [ ] or [ ] key to select the destination from the list, and then press the [ ] key.
The check box on the left side of the selected destination is selected.
Repeat this step to add more destinations.
3
3. Press the [OK] key.
• In the destination list, each destination client computer is displayed using up to 20 characters.
• We recommend you register easily recognizable computer names.
• If a WSD-compatible computer is connected to the network, the following five destinations appear
on the display panel automatically. For details about the saving location of files in each destination,
see the relevant computer's settings.
• Scan to "Computer Name"
• Scan for Print to "Computer Name"
• Scan for E-mail to "Computer Name"
• Scan for Fax to "Computer Name"
• Scan for OCR to "Computer Name" (Scan for OCR to "Computer Name" might not be available
depending on the destination client computer.)
• If the target destination does not appear, take one of the following steps:
• Display the destination by selecting the initial letter of its title
• Display the destination by pressing the [ ] or [ ] key
• You can also search for the destination by pressing the [Search Destination] key. For details, see
"Searching for a destination client computer".
• The destination list can display up to 250 client computer destinations.
• You cannot use the Quick Dial keys while you are using the WSD scanner function.
• p.90 "Searching for a destination client computer"
Searching for a destination client computer
Use the following procedure to search for a destination client computer and select it.
90