Creating A New Scan Profile; Scan Profile Items And Settings - Ricoh 917F Operating Instructions Manual

3. Sending Scan Files Using WSD

Creating a New Scan Profile

Use the following procedure to create a new profile.
1. On the [Start] menu, click [Control Panel].
Control Panel opens.
2. Click [Hardware and Sound], and then click [Scanner and Cameras].
The [Scanner and Cameras] dialog box appears.
3
3. Select this machine, and then click [Scan Profiles].
The [Scan Profiles] dialog box appears.
4. Click [Add].
The [Add New Profile] dialog box appears.
5. Configure the necessary settings for the profile.
For details, see "Scan Profile Items and Settings".
6. Click [Save Profile].
The scan settings are saved as a new profile.
• You can register multiple profiles. If multiple profiles are registered, the profile specified as default in
the [Scan Profiles] dialog box is applied.
• To specify a scan profile as the default profile, perform one of the following procedures:
• In the [Scan Profiles] dialog box, click the scan profile, and then click [Set as Default].
• After you create a new scan profile, in the [Add New Profile] dialog box, select the [Set this
profile as default] check box.
• p.96 "Scan Profile Items and Settings"

Scan Profile Items and Settings

The following table tells you the scan profile settings that you can configure.
Scanner:
Profile name:
Source:
96
Item Scan settings
Select this machine.
Enter the profile name.
Select one of the following: