Reception Settings - Ricoh 917F Operating Instructions Manual

Reception Settings

This section describes the User Tools in the Reception Settings menu under Fax Features.
Switch Reception Mode
Specify the method for receiving fax documents.
The default setting is Auto Reception.
RX Mode Auto Switch Time
Specify the number of rings with the Auto Switch Time.
In Auto Switch Mode, the machine rings a number of times to give you the chance to pick up the
handset before taking the call automatically.
The default setting is 8 Times.
1. Select [Fax Features] using [ ] or [ ], and then press the [OK] key.
2. Select [Reception Settings] using [ ] or [ ], and then press the [OK] key.
3. Select [RX Mode Auto Switch Time] using [ ] or [ ], and then press the [OK] key.
4. Enter the number of rings from 1 to 29 using the number keys, and then press the [OK] key.
5. Press the [User Tools/Counter] key.
Authorized Reception
Specify whether or not unwanted fax documents are to be screened out.
The default setting is Off.
To use this function, program the Special Senders function in advance. For details, see "Programming
Initial Set Up of a Special Sender".
Checkered Mark
Specify whether or not a checkered mark is to be printed on the first page of received fax documents.
The default setting is On.
Center Mark
Specify whether or not a center mark is to be printed halfway down the left side and at the top center
of each page received.
The default setting is Off.
Print Reception Time
Specify whether or not received date and time are to be printed at the bottom of received fax
documents.
The default setting is Off.
2 Sided Print
Specify whether or not received fax documents are to be printed on both sides of the paper.
Reception Settings
6
201