Displaying Lldp Information For A Port - HP V1910 Switch Series User Manual

Item
Tx Interval
Return to LLDP configuration task

Displaying LLDP information for a port

Select Network > LLDP from the navigation tree to enter the Port Setup tab, as shown in
port list, click a port name to display its LLDP information at the lower half of the page. The LLDP
information is organized by type and displayed in tabs as shown in
to display data you are interested in.
Figure 190 The Local Information tab
Table 97 Local information of an LLDP-enabled port
Field
Port ID subtype
Power port class
Description
Set the LLDPDU transmit interval.
IMPORTANT:
If the product of the TTL multiplier and the LLDPDU transmit interval is greater than
65535, the TTL carried in transmitted LLDPDUs takes 65535 seconds. In this case, the
likelihood exists that the LLDPDU transmit interval is greater than TTL. You should
avoid the situation, because the LLDP neighbors will fail to receive LLDPDUs to update
information about the device you are configuring before it is aged out.
list.
Description
Port ID type:

Interface alias

Port component

MAC address

Network address

Interface name

Agent circuit ID

Locally assigned, namely, the local configuration
The power over Ethernet port class:

PSE—A power supply device.

PD—A powered device.
226
Figure
Figure 190. You can click these tabs
186. In the