Type user1 in the text box of User Name.
Select group1 from the Group Name drop-down box.
Click Apply.
# Enable the agent to send SNMP traps.
Click the Trap tab and enter the page as shown in
Figure 117 Enable the agent to send SNMP traps
Select the Enable SNMP Trap check-box.
Click Apply.
# Add target hosts of SNMP traps.
Click Add to enter the page as shown in
Figure 118 Add target hosts of SNMP traps
Select the destination IP address type as IPv4.
Type the destination address 1.1.1.2.
Type the user name user1.
Select v3 from the Security Model drop-down box.
Click Apply.
Configure NMS.
2.
Figure 1
17.
Figure 1
18.
129