Figure 344 Local user configuration page
Table 133 Local user configuration items
Item
Username
Password
Confirm
Group
Service-type
Expire-time
Level
VLAN
Description
Specify a name for the local user.
Specify and confirm the password of the local user. The settings of these two fields must
be the same.
Select a user group for the local user.
For more information about user group configuration, see
Select the service types for the local user to use, including FTP, Telnet, LAN access
(accessing through the Ethernet, such as 802.1x users), and SSH.
IMPORTANT:
If you do not specify any service type for a local user who uses local authentication, the
user cannot pass authentication and therefore cannot log in.
Specify an expiration time for the local user, in the format HH:MM:SS-YYYY/MM/DD.
When authenticating a local user with the expiration time argument configured, the
access device checks whether the expiration time has elapsed. If not, the device permits
the user to log in.
Select an authorization level for the local user, which
can be Visitor, Monitor, Configure, or Management, in
ascending order of priority.
Specify the VLAN to be authorized to the local user
after the user passes authentication.
371
"Configuring a user
group."
IMPORTANT:
Every authorization attribute
has its definite application
environments and purposes.
When configuring