Configuration Guidelines - HP V1910 Switch Series User Manual

 In the Port Settings area, select the check box before GigabitEthernet1/0/1.
Click Enable.

Now, Switch D becomes a member switch.
Verify the configuration
3.
# Display the stack topology on Switch A.
Select IRF from the navigation tree of Switch A and click the Topology Summary tab.

You can view the information as shown in

Figure 30 Verify the configuration

Configuration guidelines

When configuring a stack, note the following issues:
If a switch is already configured as the stack master, you are not allowed to modify the private IP
1.
address pool on the switch.
If a switch is already configured as a stack member, the Global Settings area on the member
2.
switch is grayed out.
Figure 30.
42