HP V1910 Switch Series User Manual page 137

Figure 107 Create an SNMP user
Table 46 Configuration items for creating an SNMP user
Item
User Name
Security Level
Group Name
Authentication Mode
Authentication Password
Confirm Authentication Password
Privacy Mode
Privacy Password
Description
Set the SNMP user name.
Select the security level for the SNMP group. The following are the
available security levels:

NoAuth/NoPriv—No authentication no privacy.

Auth/NoPriv—Authentication without privacy.

Auth/Priv—Authentication and privacy.
Select an SNMP group to which the user belongs.

When the security level is NoAuth/NoPriv, you can select an
SNMP group with no authentication no privacy.

When the security level is Auth/NoPriv, you can select an SNMP
group with no authentication no privacy or authentication
without privacy.

When the security level is Auth/Priv, you can select an SNMP
group of any security level.
Select an authentication mode (including MD5 and SHA) when the
security level is Auth/NoPriv or Auth/Priv.
Set the authentication password when the security level is
Auth/NoPriv or Auth/Priv.
The confirm authentication password must be the same with the
authentication password.
Select a privacy mode (including DES56, AES128, and 3DES)
when the security level is Auth/Priv.
Set the privacy password when the security level is Auth/Priv.
123