HP V1910 Switch Series User Manual page 207

Field
Port Cost(Legacy)
Desg. Bridge/Port
Port Edged
Point-to-point
Transmit Limit
Protection Type
MST BPDU Format
Port Config-
Digest-Snooping
Rapid transition
Num of Vlans Mapped
PortTimes
BPDU Sent
BPDU Received
Protocol Status
Protocol Std.
Version
CIST Bridge-Prio.
MAC address
Description
Path cost of the port. The field in the bracket indicates the standard used for
port path cost calculation, which can be Legacy, dot1d-1998, or dot1t.

Config indicates the configured value.

Active indicates the actual value.
Designated bridge ID and port ID of the port.
The port ID displayed is insignificant for a port that does not support port
priority.
Whether or not the port is an edge port:

Config indicates the configured value.

Active indicates the actual value.
Whether or not the port is connected to a point-to-point link:

Config indicates the configured value.

Active indicates the actual value.
The maximum number of packets sent within each hello time.
Protection type on the port:

Root—Root guard

Loop—Loop guard

BPDU—BPDU guard

None—No protection
Format of the MST BPDUs that the port can send, which can be legacy or
802.1s.

Config indicates the configured value.

Active indicates the actual value.
Whether or not digest snooping is enabled on the port.
Whether or not the current port rapidly transitions to the forwarding state.
Number of VLANs mapped to the current MSTI.
Major parameters for the port:

Hello—Hello timer

MaxAge—Max Age timer

FWDly—Forward delay timer

MsgAge—Message Age timer

Remain Hop—Remaining hops
Statistics on sent BPDUs.
Statistics on received BPDUs.
Whether or not MSTP is enabled.
MSTP standard.
MSTP version.
Priority of the current device in the CIST.
MAC address of the current device.
193