Configuration procedure
Configure the IP addresses of the interfaces. (Omitted)
1.
Configure the RADIUS scheme system
2.
# Configure the RADIUS authentication server.
From the navigation tree, select Authentication > RADIUS. The RADIUS server configuration page
appears.
Figure 302 RADIUS authentication server configuration
Select Authentication Server as the server type.
Enter the primary server IP address 10.1.1.1.
Enter the primary server UDP port number 1812.
Select active as the primary server status.
Click Apply.
# Configure the RADIUS accounting server.
Figure 303 RADIUS accounting server configuration
Select Accounting Server as the server type.
334