Configuring a VLAN
Configuration task list
Use either of the following approaches or the combination of them to configure a VLAN, as shown in
Table 49
and
Table 49 VLAN configuration task list (approach I)
Task
Creating VLANs
Selecting VLANs
Modifying a VLAN
Table 50 VLAN configuration task list (approach II)
Task
Creating VLANs
Modifying ports
Creating VLANs
Select Network > VLAN from the navigation tree and click the Create tab to enter the page shown in
Figure
123.
Table
50:
Remarks
Required
Create one or multiple VLANs.
Required
Configure a subset of all existing VLANs. This step is required before
displaying, modifying, or removing a VLAN.
Required
Configure the untagged member ports and tagged member ports of the VLAN,
or remove the specified ports from the VLAN.
Remarks
Required
Create one or multiple VLANs.
Required
Configure ports as the untagged members or tagged members of VLANs, or
remove ports from VLANs; configure the link type and PVID of the ports.
136