Configuring A Statistics Entry - HP V1910 Switch Series User Manual

Task
Configuring an alarm
entry
Displaying RMON running status
After you configure the RMON statistics function or the alarm function, you can view RMON running
status and verify the configuration by performing tasks in
Table 32 Display RMON running status
Task
Displaying RMON statistics
information
Displaying RMON history sampling
information
Displaying RMON event logs

Configuring a statistics entry

Select Device > RMON from the navigation tree to enter the page of the Statistics tab, as shown in
77. Click Add to enter the page for adding a statistics entry, as shown in
Figure 77 Statistics entry
Remarks
Required
You can create up to 60 alarm entries for an alarm table.
With an alarm entry created, the specified alarm event will be triggered when an
abnormity occurs, and the alarm event defines how to deal with the abnormity.
IMPORTANT:
An entry cannot be created if the values of the specified event description, owners,
and actions are identical to those of an existing entry in the system.
Remarks
View the interface statistics during the period from the time the statistics
entry is created to the time the page is displayed. The statistics are
cleared after the device reboots.
After you have created a history control entry on an interface, the system
calculates the information of the interface periodically and saves the
information to the etherHistoryEntry table. You can perform this task to
view the entries in this table. And the number of history sampling records
that can be displayed and the history sampling interval are specified
when you configure the history group.
If you have configured the system to log an event after the event is
triggered when you configure the event group, the event is recorded into
the RMON log. You can perform this task to display the details of the log
table
98
Table 32.
Figure
Figure
78.