Configuring Mstp On A Port - HP V1910 Switch Series User Manual

Item
TC Protection
TC Protection Threshold
Return to MSTP configuration task

Configuring MSTP on a port

Select Network > MSTP from the navigation tree, and click the Port Setup tab to enter the page shown in
Figure 169.
Figure 169 MSTP configuration on a port
Table 77 Configuration items of configuring MSTP on a port
Item
STP
Description
Enable or disable TC-BPDU guard.
When receiving topology change (TC) BPDUs, the device flushes its forwarding
address entries. If someone forges TC-BPDUs to attack the device, the device will
receive a large number of TC-BPDUs within a short time and frequently flushes its
forwarding address entries. This affects network stability.
With the TC-BPDU guard function, you can prevent frequent flushing of forwarding
address entries.
IMPORTANT:
HP does not recommend you to disable this function.
Set the maximum number of immediate forwarding address entry flushes the device
can perform within a certain period of time after receiving the first TC-BPDU.
list.
Description
Enable or disable STP on the port.
189