HP V1910 Switch Series User Manual page 131

Figure 97 Set up
Table 42 Configuration items for enabling SNMP
Item
SNMP
Local Engine ID
Maximum Packet Size
Contact
Description
Specify to enable or disable SNMP.
Configure the local engine ID.
The validity of a user after it is created depends on the engine ID of the SNMP
agent. If the engine ID when the user is created is not identical to the current
engine ID, the user is invalid.
Configure the maximum size of an SNMP packet that the agent can
receive/send.
Set a character string to describe the contact information for system
maintenance.
If the device is faulty, the maintainer can contact the manufacture factory
according to the contact information of the device.
117