Radius Configuration Example - HP V1910 Switch Series User Manual

Item
Username Format
Unit of Data Flows
Unit of Packets
Table 132 Relationship between the real-time accounting interval and the number of users
Number of users
1 to 99
100 to 499
500 to 999
1000
Return to RADIUS configuration task

RADIUS configuration example

Network requirements
As shown in Figure
the user (record the online duration of the Telnet user).
On the RADIUS server (a CAMS or iMC server, using the default port for authentication and accounting),
the Telnet user's username and password and the shared key expert have been configured for packet
exchange with the switch.
On the switch, it is required to configure the shared key for packet exchange with the RADIUS server as
expert, and configure the system to remove the domain name of a username before sending it to the
RADIUS server.
Description
Set the format of username sent to the RADIUS server.
A username is generally in the format of userid@isp-name, of which
isp-name is used by the device to determine the ISP domain to which
a user belongs. If a RADIUS server does not accept a username
including an ISP domain name, you can configure the device to
remove the domain name of a username before sending it to the
RADIUS server.
without-domain: Specifies to remove the domain name of a
username that is to be sent to the RADIUS server.
with-domain: Specifies to keep the domain name of a username that
is to be sent to the RADIUS server.
Specify the unit for data flows sent to the RADIUS server, which can
be:




Specify the unit for data packets sent to the RADIUS server, which
can be




list.
334, configure the switch to let the RADIUS server authenticate and keep accounts on
byte
kilo-byte
mega-byte
giga-byte
one-packet
kilo-packet
mega-packet
giga-packet
Real-time accounting interval (in minutes)
3
6
12
15