HP V1910 Switch Series User Manual page 413

 Select Permit from the Operation drop-down list.
Select the Source IP Address check box and then type 10.1.1.3.

Type 0.0.0.0 in the Source Wildcard text box.

 Click Add.
Figure 380 Configure an ACL rule to permit Host B
# Configure authorized IP.
Select Security > Authorized IP from the navigation tree and then click the Setup tab to enter the

authorized IP configuration page shown in
Select 2001 for IPv4 ACL in the Telnet field.

Select 2001 for IPv4 ACL in the Web(HTTP) field.

Click Apply.

Figure 381.
399