Figure 178 The Setup tab
After finishing each configuration item, click the right Apply button to submit the configuration.
Table 85
describes the configuration items.
Table 85 LACP priority configuration items
Item
Select LACP enabled port(s) parameters
Select port(s) to apply Port Priority
System Priority
Return to
Dynamic aggregation group configuration task
Displaying information of LACP-enabled ports
Select Network > LACP from the navigation tree. The Summary tab is displayed by default, as shown in
Figure
179.
Description
Set a port LACP priority.
Select the ports where the port LACP priority you set will
apply on the chassis front panel.
You can set LACP priority not only on LACP-enabled ports but
also on LACP-disabled ports.
Set the LACP priority of the local system.
list.
207