Enabling Dhcp And Configuring Advanced Parameters For The Dhcp Relay Agent - HP V1910 Switch Series User Manual

Task
Configuring and displaying clients'
IP-to-MAC bindings
Enabling DHCP and configuring advanced
parameters for the DHCP relay agent
Select Network > DHCP from the navigation tree to enter the default DHCP Relay page. Enable or disable
DHCP in the DHCP Service field. Click Display Advanced Configuration to expand the advanced DHCP
relay agent configuration field, as shown in
Figure 240 DHCP relay agent configuration page
Table 106 DHCP service and advanced DHCP relay agent configuration items
Item
DHCP Service
Remarks
Optional
Create a static IP-to-MAC binding, and view static and dynamic
bindings.
The DHCP relay agent can dynamically record clients' IP-to-MAC
bindings after clients get IP addresses. It also supports static bindings,
that is, you can manually configure IP-to-MAC bindings on the DHCP
relay agent, so that users can access external network using fixed IP
addresses.
By default, no static binding is created.
Figure
Description
Enable or disable global DHCP.
274
240.