HP V1910 Switch Series User Manual page 425

Figure 386 The page for configuring a rule for an Ethernet frame header ACL
Table 152 describes the configuration items for creating a rule for an Ethernet frame header IPv4 ACL.
Table 152 Configuration items for an Ethernet frame header IPv4 ACL rule
Item
Select Access Control List (ACL)
Rule ID
Operation
Source MAC
Address
MAC
Source Mask
Address
Destination MAC
Filter
Address
Destination Mask
Description
Select the Ethernet frame header IPv4 ACL for which you want to configure
rules.
Available ACLs are Ethernet frame header IPv4 ACLs that have been
configured.
Select the Rule ID option and type a number for the rule.
If you do not specify the rule number, the system will assign one
automatically.
Select the operation to be performed for packets matching the rule.

Permit—Allows matched packets to pass.

Deny—Drops matched packets.
Select the Source MAC Address option and type a source MAC address and
a mask.
Select the Destination MAC Address option and type a destination MAC
address and a mask.
411