Configuring Service Management - HP V1910 Switch Series User Manual

Configuring service management

Select Network > Service from the navigation tree to enter the service management configuration page,
as shown in
Figure 259 Service management
Table 113 Service management configuration items
Item
FTP
Telnet
SSH
SFTP
HTTP
Figure 259.
Description
Specify whether to enable the FTP service.
Enable FTP
service
The FTP service is disabled by default.
Associate the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
ACL
You can view this configuration item by clicking the expanding button in
front of FTP.
Specify whether to enable the Telnet service.
Enable Telnet
service
The Telnet service is disabled by default.
Specify whether to enable the SSH service.
Enable SSH
service
The SSH service is disabled by default.
Specify whether to enable the SFTP service.
The SFTP service is disabled by default.
Enable SFTP
service
When you enable the SFTP service, the SSH service must be enabled.
Specify whether to enable the HTTP service.
Enable HTTP
service
The HTTP service is enabled by default.
IMPORTANT:
292