HP V1910 Switch Series User Manual page 255

Figure 207 The page for configuring the voice VLAN function on ports
Select Auto in the Voice VLAN port mode drop-down list.

Select Enable in the Voice VLAN port state drop-down list.

 Type 2 in the Voice VLAN ID field.
Select ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 on the chassis front panel.

Click Apply.

# Enable LLDP on ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2. If LLDP is enabled (the
default setting), skip this step.
# Set both the LLDP operating mode and the CDP operating mode to TxRx on ports GigabitEthernet
1/0/1 and GigabitEthernet 1/0/2.
Select Network > LLDP from the navigation tree to enter the Port Setup tab. Select ports

GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 and click Modify Selected, as shown in
208. The page shown in Figure 209 is displayed.
241
Figure