Acl Configuration; Acl Overview; Introduction To Ipv4 Acl - HP V1910 Switch Series User Manual

V1910 switch series
Hide thumbs Also See for V1910 Switch Series:
Table of Contents

Advertisement

ACL configuration

ACL overview

With the growth of network scale and network traffic, network security and bandwidth allocation
become more and more critical to network management. Packet filtering can be used to efficiently
prevent illegal access to networks and to control network traffic and save network resources. One way to
implement packet filtering is to use access control lists (ACLs).
An ACL is a set of rules (or a set of permit or deny statements) for determining which packets can pass
and which ones should be rejected based on match criteria such as source address, destination address,
and port number. ACLs are widely used with technologies such as QoS, where traffic identification is
desired.

Introduction to IPv4 ACL

IPv4 ACL classification
IPv4 ACLs, identified by ACL numbers, fall into the following categories, as shown in
Table 145 IPv4 ACL categories
Category
Basic IPv4 ACL
Advanced IPv4 ACL
Ethernet frame header ACL
IPv4 ACL match order
An ACL may consist of multiple rules, which specify different match criteria. These match criteria may
have overlapping or conflicting parts. The match order determines how packets should be matched
against the rules. The comparison of a packet against ACL rules stops immediately after a match is found.
The packet is then processed as per the rule.
The following types of IPv4 ACL match orders are available:
config—Compares packets against ACL rules in the order that the rules are configured.
auto—Compares packets against ACL rules in the depth-first match order.
The term depth-first match has different meanings for different types of IPv4 ACLs.
ACL number
Match criteria
2000 to 2999
Source IP address
Source IP address, destination IP address, protocol
3000 to 3999
carried over IP, and other Layer 3 or Layer 4 protocol
header information
Layer 2 protocol header fields such as source MAC
4000 to 4999
address, destination MAC address, 802.1p
precedence, and link layer protocol type
401
Table
145.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1910 seriesV1910-24g-poe (170w)V1910-24g-poe (365w)

Table of Contents