HP V1910 Switch Series User Manual page 271

# Enable the fast leave function for GigabitEthernet 1/0/3.
Click the Advanced tab.

Figure 223 Configure IGMP snooping on GigabitEthernet 1/0/3
Select GigabitEthernet 1/0/3 from the Port drop-down list.

 Type the VLAN ID 100.
Select the Enable radio button for Fast Leave.

Click Apply to complete the operation.

Configuration verification
# Display the IGMP snooping multicast entry information on Switch A.
Select Network > IGMP Snooping in the navigation tree to enter the basic configuration page.

 Click the plus sign (+) in front of Show Entries in the basic VLAN configuration page to display
information about IGMP snooping multicast entries, as shown in
Figure 224 IGMP snooping multicast entry information displaying page
Click the

this entry, as shown in
icon corresponding to the multicast entry (0.0.0.0, 224.1.1.1) to view information about
Figure 225.
257
Figure 224.