HP V1910 Switch Series User Manual page 237

Item
System Capabilities
System Description
System Name
Management Address
Port VLAN ID
Protocol VLAN ID
DOT1 TLV
Setting
VLAN Name
Link Aggregation
MAC/PHY
DOT3 TLV
Configuration/Status
Setting
Maximum Frame Size
Power via MDI
LLDP-MED Capabilities
Inventory
Network Policy
Extended Power-via-MDI
MED TLV
Capability
Setting
Emergency Number
Address
Description
Select to include the system capabilities TLV in transmitted
LLDPDUs.
Select to include the system description TLV in transmitted
LLDPDUs.
Select to include the system name TLV in transmitted LLDPDUs.
Select to include the management address TLV in transmitted
LLDPDUs and in addition, set the management address and its
format (a numeric or character string in the TLV).
If no management address is specified, the main IP address of
the lowest VLAN carried on the port is used. If no main IP
address is assigned to the VLAN, 127.0.0.1 is used.
Select to include the PVID TLV in transmitted LLDPDUs.
Select to include port and protocol VLAN ID TLVs in transmitted
LLDPDUs and specify the VLAN IDs to be advertised.
If no VLAN is specified, the lowest protocol VLAN ID is
transmitted.
Select to include VLAN name TLVs in transmitted LLDPDUs and
specify the VLAN IDs to be advertised.
If no VLAN is specified, the lowest VLAN carried on the port is
advertised.
Select to include the link aggregation TLV in transmitted
LLDPDUs.
Select to include the MAC/PHY configuration/status TLV in
transmitted LLDPDUs.
Select to include the maximum frame size TLV in transmitted
LLDPDUs.
Select to include the power via MDI TLV in transmitted LLDPDUs.
Select to include the LLDP-MED capabilities TLV in transmitted
LLDPDUs.
Select to include the hardware revision TLV, firmware revision
TLV, software revision TLV, serial number TLV, manufacturer
name TLV, model name TLV and asset ID TLV in transmitted
LLDPDUs.
Select to include the network policy TLV in transmitted LLDPDUs.
Select to include the extended power-via-MDI TLV in transmitted
LLDPDUs.
Select to encode the emergency call number in the location
identification TLV in transmitted LLDPDUs and set the emergency
call number.
Select Address to encode the civic address information of the
network connectivity device in the location identification TLV in
transmitted LLDPDUs. In addition, set the device type, which can
be a DHCP server, switch or LLDP-MED endpoint, country code,
223