Back Panel; Option Authorization File (Oaf) - Topcon HiPer Pro Operator's Manual

Introduction

Back Panel

Figure 1-6 shows back panel components for the HiPer Pro.
• Vent plug – Equalizes the pressure between the inside of the
receiver and the outside environment.
• Slant height measure mark (SHMM)
Vent Plug
If the Base Station receiver is configured with an external antenna
port, see Appendix A for details.

Option Authorization File (OAF)

Topcon Positioning Systems issues an Option Authorization File
(OAF) to enable the specific options that customers purchase. An
Option Authorization File allows customers to customize and
configure the receiver according to particular needs, thus only
purchasing those options needed.
Typically, all receivers ship with a temporary OAF that allows it to be
used for a predetermined period of time. When the receiver is
purchased, a new OAF permanently activates desired, purchased
options. Receiver options remain intact when clearing the NVRAM or
resetting the receiver.
The OAF enables the following kinds of functions. For a complete list
of available options and details, visit the TPS website
(www.topcongps.com/tech/index) or consult your TPS dealer.
1-16
Slant Height Measure Mark
Figure 1-6. HiPer Pro Back Panels
HiPer Pro Operator's Manual