Set The 'Spool Threshold - Oce ColorWave 600 User Manual

Set the 'Spool threshold'

Set the 'Spool threshold'
Introduction
When the job memory is full the printer can not receive new jobs. You can tune the
'Spool threshold' to define the spool capacity for specific job types. Allow a higher capac-
ity for small jobs if you select Low. Select High if you want to reduce the risk of aborting
file transfer of large print jobs if the job memory is full.
You can choose one of following values.
• 'Low'
Select this value if you want to allow a higher capacity for small print jobs.
• 'Normal'
This is the default setting.
• 'High'
Select this value if you want to reduce the risk of aborting file transfer of large print
jobs if the job memory is full.
Before you begin
This setting is editable for the Key operator or Power user.
How to set the Spool threshold
Click 'Preferences' - 'System properties'.
1.
Click 'Edit' in the 'Printer properties' bar or click the value of the 'Spool threshold' setting.
2.
Select the correct value.
3.
Select 'Low' if print productivity is an important factor.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
4.
328 Chapter 8 - Print quality and Print productivity