Manual Stapling - Oce 750 User Manual

Output Modes

Manual Stapling

The Manual Stapling function is available only with the Cover Sheet Feeder (Post
Inserter) option installed on the Finisher / Finisher-Folder. To use this function, simply
place a set of paper to be stapled into the cover sheet feeder of the finisher, select the
desired staple mode from the manual stapling operation panel located on the top of the
finisher, then press the [
Booklet tray or the Primary (main) tray according to the selected method, described
below.
When selecting stapling & folding, the machine with a Trimmer Unit trims it automatically
and delivers it to the Trimmer Unit tray.
• Stapling & Folding (2 staples in the center + Folding): Booklet tray,
or Stapling & Folding and Trimming (2 staples in the center + Folding + Trimming):
Trimmer Unit tray
• 1 oblique staple: Primary (main) tray
• 2 parallel staples: Primary (main) tray
Specifications for Manual Stapling & Folding mode
Paper size: 11"x17", 8.5"x14", 8.5"x11"R, A4, A4R (8.27"x11.69", 210mmx297mm)
Paper weight: 16~24 lb (20 lb paper is recommended)
Staple capacity: 16 sheets max. (20 lb paper)
15 sheets max. (20 lb paper with a thick paper cover)
Output tray: Booklet tray / Trimmer Unit tray
Specifications for Manual Stapling 1 oblique staple and 2 parallel staples
Paper size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", A4, A4R (8.27"x11.69",
210mmx297mm)
Paper weight: 16~24 lb (20 lb paper is recommended)
Staple capacity: 50 sheets max. (20 lb paper)
Output tray: Primary (main) tray
Stapling &
Stapling & Folding
Folding
and Trimming
6-12 Output Modes
] key. The stapled set will be delivered to the
Staple Start/Stop
1 oblique staple
2 parallel staples
Manual stapling control panel
MAN