Table of Contents
Advertisement
CHAPTER 15
Connecting the J-SRX210 Services
Gateway to Management Devices
Connecting a J-SRX210 Services Gateway to the J-Web Interface
This chapter includes the following topics:
Connecting a J-SRX210 Services Gateway to the J-Web Interface on page 83
Connecting a J-SRX210 Services Gateway to the CLI Locally on page 85
Connecting a J-SRX210 Services Gateway to the CLI Remotely on page 86
Connecting the Modem at the J-SRX210 Services Gateway End on page 87
Connecting the Modem to the Console Port on the J-SRX210 Services
Gateway on page 88
Connecting to the CLI at the User End for the J-SRX210 Services Gateway on page 89
If you plan to use the J-Web interface to configure the J-SRX210 Services Gateway, you
must connect through one of the built-in Ethernet management ports.
When the services gateway is powered on for the first time, the system looks for a DHCP
server. If it does not find one, the system assigns an IP address within the
subnetwork to any devices connected to the system.
To connect to the J-Web interface through any of the ports
on the services gateway, see Figure 24 on page 84.
fe-0/0/7
192.168.1.0/24
ge-0/0/1
or
fe-0/0/2
to
83
Advertisement
Table of Contents
