Station Message Detail Recording (Call Logging) - Panasonic S-ICX Technical Manual

Section 700 - Operation

Station Message Detail Recording (Call Logging)

Description
Station Message Detail Recording (SMDR) (Call Logging) provides detailed call records of outgoing
calls. Call Logging records can be output to a printer or an external call accounting system.
Various types of information are reported on the Call Logging record and each type of information
occupies a set position in the Call Logging format (See Figure 1 on page 60.) One type of information
is the "condition code" which occupies the first position in the output format. This code specifies what
type of call was made or received (e.g., DISA Incoming call [S] or Closed Numbering call [W]).
However, condition codes are prioritized, and the type of call determines what code is displayed.
The following tables shows the priority of condition codes for outgoing calls and incoming calls.
Table 8. Priority of outgoing call condition codes
Priority
Highest
2nd
3rd
4th
Lowest
For example, an outgoing call is an LRS Outgoing call (L) but it is also a transferred call. The Call
Logging data condition code will be T to indicate that the call was an Outgoing Transfer. (A
transferred call's condition code takes precedence over the type of call - LRS Outgoing call [L].)
Table 9. Priority of incoming call condition codes
Priority
Highest
2nd
Lowest
For example, an incoming call is a DDI Incoming call (D), but it is also a transferred call. The Call
Logging data condition code will be t to indicate that the call was an Incoming Transfer call. (A
transferred call's condition code takes precedence over the type of call - DDI Incoming call [D].)
S-ICX-50-700
Condition
Code
T or H T = Outgoing Transfer Call
H = Outgoing Hold Call
F F = Call Forward Outside Call
W W = Closed Numbering
Note: In the case of an MCO outgoing call seizing the
private line, the condition code 0 is displayed.
L L = LCR Outgoing Call
O O = Outgoing Call
Condition
Code
h or t h = Incoming Hold
t = Incoming Transfer
D, N, or S D = DDI Incoming Call
N = Network Incoming Call
S = DISA Incoming Call
I or A I = Incoming Call
A = Abandoned Call
S-ICX (International) issued October 2000
Chapter 3. System Features
Description
Description
59