Installable Expansion Cards And Notes On Installation - Fujitsu Primergy RX600 S2 User Manual

Chapter 7 Installing Internal Options
7.5.2 Installable Expansion Cards and Notes on
Installation
Installable Expansion Cards
Up to seven expansion cards listed in the following table can be installed in the server.
Installable card (Model name)
Fibre Channel Controller
(PG-FC201)
Eth. Ctrl dual 1000-BASE-T(PG-286)
Remote service board
(PG-RSB104)
SCSI Ctrl U160 (PG-128)
RAID Ctrl 2-Channel 128MB w/ BBU
(PG-142E3)
Eth. Ctrl 1000-BASE-T Cu (PG-1892)
Eth. Ctrl 1000-BASE-SX Fibre LC
(PG-1882)
Eth. Ctrl 2x1000-BASE-T Cu (PG-1862)
*: You can only have up to four Ethernet controllers, regardless of the PCI bus interface.
Expansion Card Installation Order
Install expansion cards into the slots according to the priority indicated in the following table.
Installable expansion card (Model name)
Fibre Channel Controller (GP-FC201)
Eth. Ctrl dual 1000-BASE-T(PG-286)
Remote service board (PG-RSB104)
SCSI Ctrl U160 (PG-128)
RAID Ctrl 2-Channel 128MB w/ BBU (PG-142E3)
Eth. Ctrl 1000-BASE-T Cu (PG-1892)
Eth. Ctrl 1000-BASE-SX Fibre LC (PG-1882)
Eth. Ctrl 2x1000-BASE-T Cu (PG-1862)
*: PG-142E3 cannot be installed in the slot 6 and 7 concurrently.
Follow the "Installation order" shown in the table when installing the cards and drivers. If you turn on
the power after installing multiple expansion cards simultaneously or in a wrong order, they will not
function properly.
206
Table: List of Installable Expansion Cards
Number of
cards
4 4
*
4
4
1 1
2 3
2
3
3
2
Table: Expansion Card Installation Order and Slots
*
PCI bus
4 PCI-Express x4
PCI-Express x4 1000BASE-T
3 -
PCI 64bit/66MHz For internal/external SCSI
devices (Ultra 160 SCSI)
For external array system
(Ultra 320 2ch SCSI)
PCI-X 1000BASE-T
64bit/133MHz
1000BASE-SX
1000BASE-T
PCI slot
1 2 3 4 5 6
1 - 2 3 4 -
1 - 2 3 4 -
- - - - - -
- - - - - 1
- 1 - - - 2
- 1 - - - 2
- 1 - - - 2
- - - - - 1
Remarks
Installation
order
7
- 1
- 2
1 3
2 4
3 5
3 6
3 7
2 8