For A Windows 2000 Server - Fujitsu Primergy RX600 S2 User Manual

Chapter 9 Operation and Maintenance
5
Insert the ASR floppy disk and follow the window instructions.
6
Install the driver.
For details on how to install the driver, refer to step 4 of "4.2.1 Installing Windows Server 2003
x64" ( Pg.118) or "4.2.2 Installing Windows Server 2003" ( Pg.120).
7
Follow the window instructions to restore the system.
• When prompted to change the floppy disk, follow the instructions and change it.
• If a message appears indicating that the driver has not passed Windows Logo testing to verify
its compatibility with Windows, select [Yes] to continue the installation procedure.
• When prompted to insert media, set the backup media created beforehand and follow the
messages to continue.
Notes on Automated System Recovery
Automated System Recovery does not restore data files.

9.6.2 For a Windows 2000 Server

●
Items Required
• Windows 2000 Server CD-ROM
• Windows 2000 Server system recovery disk (created beforehand)
• Windows 2000 Server First Step Guide
1
Follow "Windows 2000 Server First Step Guide" to start Windows 2000 Server
setup.
2
From the [Welcome to Setup] window of the Windows 2000 Server Setup
program, press the [R] key to select restoration.
3
Follow the message on the setup window to restore the system.
Notes on system restoration
The system may return to the initial installation conditions depending on the restoration information
used. In this case, the system must be configured after system restoration.
Windows 2000 Server may have to be reinstalled if system files or system information are severely
damaged. If this is the case, reinstall it. Refer to "9.7 Reinstalling the OS" ( Pg.283).
The message "The file ******.*** is not the original file copied when Windows 2000 was installed."
appears during file restoration. Press the [Enter] or [A] key to restore the file.
282