Boot Maintenance Manager - Fujitsu Primergy RX600 S2 User Manual

Chapter 8 Configuring Hardware and Utilities

8.2.3 Boot Maintenance Manager

In the Boot Maintenance Manager, the boot settings, such as the boot device order and the timeout
period for automatic OS startup, can be configured.
1
Turn on the server and start up the System Options menu.
"8.2.1 System Options Menu" (pg.232)
2
Press the [ ↓ ] key to select [Boot Maintenance Manager] and press the [Enter]
key in the System Options menu.
3
The Boot Maintenance Manager starts up and the following screen appears.
> Boot Options
> Driver Options
> Set Time Out Value
> Reset System
Boot Options
Driver Options
Set Time Out Value
Reset System
4
Use the [ ↓ ] key to select the desired setting, and press the [Enter] key.
234
Boot Maintenance Manager
table: Submenus of Boot Maintenance Manager
Item
Sets the boot device order and the boot device for each device type. For
setting procedures, refer to "
This option cannot be used for this server. Do not select this.
Sets the timeout period for automatic startup. For setting procedures,
■
refer to "
Restarts the system.
If you select [Reset System] and press the [Enter] key, the system
restarts.
Modify the system boot order and
add/delete
Boot Options, Syatem reboot is required
after any Boot Option change.
Esc = Exit
F9 = reset to Defaults
<Enter> = Select Entry
= Move Highlight
Description
■
Boot Options" ( pg.235).
Set Time Out Value" ( pg.236).