Fujitsu Primergy RX600 S2 User Manual page 121

4
Install the Drivers manually.
1. When the following message appears, press the [S] key.
To specify additional SCSI adapters, CD-ROM drives,
or special disk controllers for use with Windows,
including those for which you have a device
support disk from a mass storage device
manufacturer, press S.
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the driver disk created from the
ServerStart CD-ROM and press the [Enter] key.
The following message appears.
You have chosen to configure a SCSI Adapter for use with
Windows, using a device support disk provided by an
adapter manufacturer.
Select the SCSI Adapter you want from the following list,
or press ESC to return to the
previous screen.
3. Select following item and press the [Enter] key.
LSI MEGARAID Products for Windows 2003 (x86)
4. When the following message appears, press the [S] key.
The driver you provided seems to be newer than the Win-
dows default driver.
5
Follow the instructions from the setup program to continue the installation
procedure.
If a message indicating that the driver has not passed Windows Logo testing to verify its
compatibility with Windows appears, select [Yes] to continue the installation procedure.
6
Apply Windows Server 2003 Service Pack.
For details, refer to the description in the window.
7
Install the ChipsSet driver.
1. Insert the ServerStart CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the ServerStart CD-ROM.
[CD-ROM drive] :\DRV\ChipSet\Intel\General\W32\infinst_autol.exe
The installation wizard starts up.
3. Click [Next]. Follow instructions in the window to perform installation.
4. When the "Intel(R) Chipset Software Installation Utility is complete." message
appears, eject the ServerStart CD-ROM from the CD-ROM drive and click [Finish]
to restart the system.
8
Install the LAN driver.
Install the LAN driver using the driver disk created from the ServerStart CD-ROM. For more
details, refer to "4.3 Installing the LAN Driver" ( pg.126).
PRIMERGY RX600 S2 User's Guide
4
121