Installable Internal Hard Disk Units And Notes - Fujitsu Primergy RX600 S2 User Manual

Hide thumbs Also See for Primergy RX600 S2:
Table of Contents

Advertisement

7.6.2 Installable Internal Hard Disk Units and Notes

Before installing an internal hard disk unit, check the following points.
Installable Internal Hard Disk Units
The following types of SCSI hard disks can be installed in this server.
Disk capacity
73.4GB
73.4GB
146.8GB
146.8GB
300GB
Notes
Note the following points to avoid failures:
• Inside the hard disk unit, the disk for storing data is rotating at high speed to read and write data.
Because the hard disk is a very delicate device, do not move, strike, or shake the server when it is
turned on.
• Do not bang the hard disk or put metal objects on it.
• Do not use or store the device in a location affected by extreme temperature changes.
• Keep the device away from direct sunlight and from radiators and other heat sources.
• Use or store the device on a shock-and-vibration free surface.
• Do not use or store the device in a humid or dusty place.
• Do not use or store the device near magnets or devices that generate strong magnetic fields.
• Do not disassemble or take the device apart.
• Keep the disk away from condensation or water droplets.
Mishandling the hard disk could result in destruction of the data stored on the disk. Make sure to keep
a backup of important data. Even with hard disks of the same type, there could be a slight difference in
storage capacity. We recommend backing up data on the basis of files or sectors rather than hard
disks.
Table: Installable Internal Hard Disk Units
Model number
PG-HDH71V
Ultra320 SCSI, 10,000rpm
PG-HDH75V
Ultra320 SCSI, 15,000rpm
PG-HDH41V
Ultra320 SCSI, 10,000rpm
PG-HDH45V
Ultra320 SCSI, 15,000rpm
PG-HDH31V
Ultra320 SCSI, 10,000rpm
PRIMERGY RX600 S2 User's Guide
Overview
1
2
3
4
5
6
7
8
9
215

Advertisement

Table of Contents
loading

Table of Contents