Installing High Reliability Tools - Fujitsu Primergy RX600 S2 User Manual

1.2.3 Installing High Reliability Tools

You can install all high reliability tools provided with PRIMERGY by specifying them in "Application
Wizard" when the OS is installed with ServerStart.
After manual OS installation, high reliability tools can be installed all at once, just as they are installed
during OS installation with ServerStart.
The following high reliability tools are installed.
table: Installation of high reliability tools
High reliability tool
RAID Management Tool
ServerView
DSNAP
Intel® PROSet
Broadcom Advanced Control Suite (BACS)
A: Installed in any case
S: Installed if selected
*1: Will not be installed when a LAN card (PG-286/PG-1862/PG-1882/PG-1892) is not installed
Linux and Windows Server 2003 x64 do not support batch installation with ServerStart.
ServerView must be configured after installation even when the high reliability tools have been
installed at once with ServerStart. Refer to "Chapter 6 High Reliability Tools" ( pg.171).
RAID Management Tool requires that ServerView have been installed. Be sure to install ServerView.
PRIMERGY RX600 S2 User's Guide
Batch installation
Α
S
S
*1
Α
A
1
21