Fujitsu Primergy RX600 S2 User Manual page 92

Chapter 3 OS Installation Using ServerStart
2
Click [Add or Remove Windows Components]. Click the [Dynamic Host
Configuration Protocol (DHCP)] service from [Network Services].
The DHCP service is installed.
3
Create and configure a DHCP scope so that the IP address can be distributed.
■ Installing ServerStart
1
Insert the ServerStart CD-ROM into the PXE server.
The [ServerStart Launcher] window appears.
When the [ServerStart Launcher] window does not appear, execute "Launcher.exe" in the CD-
ROM.
2
Click [OK].
The Windows installer starts and the Setup window appears.
3
Click [Next].
The [License Agreement] window appears.
4
Select [I accept the license agreement] and click [Next].
The [User Information] window appears.
5
Enter the user information of the software and click [Next].
The [Destination Folder] window appears.
92