Expansion Cards Supported By Serverstart; Cautions For Manual Installation - Fujitsu Primergy RX600 S2 User Manual

Chapter 2 Checking before OS Installation

2.3.5 Expansion Cards Supported by ServerStart

ServerStart supports automatic driver installation for the following expansion cards.
Onboard SCSI array controller
Onboard LAN
Onboard VGA
LAN Card
RAID Ctrl 2-Channel 128MB w/ BBU
SCSI Ctrl U160
Fiber Channel Controller

2.3.6 Cautions for Manual Installation

■ Notes on Using an onboard SCSI array controller
The onboard SCSI array controller must be configured before the OS is installed. To check the onboard
SCSI array controller settings, start up WebBIOS. For more details, refer to "PRIMERGY RX600 S2
Onboard SCSI RAID User's Guide".
■ Free Space Required for Installation
The partition where the OS is installed must have enough free space for obtaining memory dump. For
more details, refer to"5.1 Memory Dump/Paging File Setting" ( pg.134).
■ Cautions on Restarting
In the course of installation, a message appears to indicate that the setup program restarts. Wait until it
restarts automatically.
For background operations, refer to "PRIMERGY RX600 S2 Onboard SCSI RAID User's Guide".
52
table: Automatic Expansion Card Driver Installation
Name Model
-
-
-
PG-286
PG-1862
PG-1882
PG-1892
PG-142E3
PG-128
PG-FC201
Bus
PCI
PCI
PCI
PCI-Express
PCI
PCI
PCI
PCI
PCI
PCI-Express