Jumper Settings - Fujitsu Primergy RX600 S2 User Manual

8.1.2 Jumper Settings

The meaning and setting value of jumper are as follows:
Jumper
J4A1 BIOS password
J4A2 BIOS writing
J4A3 BIOS recovery
J4A4 NVRAM clear
J8C1 FRB3 timer
J8C2 BMC
J8C3 Rolling BIOS
Rolling BIOS function
This server supports the Rolling BIOS function. With the Rolling BIOS feature, two copies of the BIOS
are stored. These are signated as the primary and secondary BIOS image. If the BIOS fails to boot to
the primary image, the secondary BIOS image is used instead of the primary image. In this case, a
POST error message will be logged to system event. BIOS updates are diverted to the secondary
image.
table: Jumper Settings
meaning setting value
1-2 (default)
2-3
1-2 (default)
2-3
1-2 (default)
2-3
1-2 (default)
2-3
1-2 (default)
2-3
1-2 (default)
2-3
1-2 (default)
2-3
No setting
PRIMERGY RX600 S2 User's Guide
Description
To delete or disable the password, set "2-
3".
Nonmodifiable jumper.
Do not change the setting.
To recovery the BIOS, set "2-3".
To clear the NVRAM forcibly, set "2-3".
Nonmodifiable jumper.
Do not change the setting.
Nonmodifiable jumper.
Do not change the setting.
Nonmodifiable jumper.
Do not change the setting.
8
231